BUY ZERO ENERGY PATENT FOR SALE  >>  Noteworthy patents for sale ads  >>  Patents for sale information  >>  Patents for sale by inventor  >>  Sell a patent  >>   Sell a patent -order now

Zero Energy Patententable Invention for Sale

This patent pending application has a Continuation, based on a patentable invention. Please click on links below for further and additional information and sale price. The Continutation patent is pending approval.

Pump:

FIG. 1. It is constituted of two cylinders, one smaller in are than the first one and a free moving piston on the small cylinder and the system is fed with water from cylinder 1 (the heavier the piston and the thicker it is, the better). These two cylinders are connected by a pipe and a valve. Subsequently, a pipe is taken out from cylinder 2 (with a valve). This pipe transmit the pumped water and the pressure.

FIG. 1. Valve 1- Open, valve 2- closed., equilibrium is reached.

Valve 1- closed, valve 2- open, the water is pumped through a pipe valve 1 open, valve 2 closed, equilibrium is reached and water is fed. ETC.

A multistage pump leading to ultra high pressures could be constructed by having several cylinders.

FIG. 2. The second one is less in area than the first one, and the third is lesser than the second in area, etc. in order to have large amounts of water, and heavy pistons on cylinders, on cylinder three the piston is heavier than the piston on cylinder two. Cylinder four is heavier than cylinder three, etc. in order to have larger compression from cylinder to the other).

FIG. 2. Valve 1 open, other valves closed, feeding of water valve 2 open, other valves closed, compression or pumping valve 3 open, other valves closed, more compression in being done etc.

Then we restart from valve 1 which lead to tremendous pressure. Compressor: a compressor is the same as the pump but we could put a cap on the water of last pipe (separating water from air and compressing) a more scientific approach will be to compress a gas instead of water. We can compress other fluids than water but these gases must be heavier than air (we can not compress air by air). As we noted the fluid must be heavier than air and will be fed by gravity through cylinder 1.

A calculation of compression (head and flow) could be done ( by using density of fluid, area of cylinders, weight of pistons, and section of pipe).

In FIG. 1. pressure of water in the outlet pipe (water used) = weight of piston over section of pipe.

Valves: electric valves could be used and a reversing contactor could be used between cylinders 1, 2 or 2, 3 or 3, 4 etc., a reversing contactor is activated by a solenoid (when 1 is on, 2 is off and vice versa) with a time delay between activations (waiting for all valves to be activated. All other reversing contactors would have the same delay time). Or we could use every electric valve apart with a time delay (the same time delay for all electric valves, of course the time delay between the on and the off and then after all valves have been activated the on again) ENGINES. Engine 1: blades in a cylinder activated by compressors on valves could constitute an engine.

FIG. 3. the blades in the cylinder are activated by pipes all around it (these pipes could have outlets at cylinder as large as the width of the cylinder). Every two consecutive outlets are connected to a compressor that works on valves, one of the two pipes is the return to the first cylinder and the other one is the outlet (pressured) of the compressor.

We must have a distance between the two pipes at cylinder larger than the distance between two blades. This creates pressure differences between blades and the blades turns. The blades could turn a shaft which generate power that could be used for everything.

Engine 2: low suction pressure on water will separate oxygen from hydrogen. The experiment we used to do at school (a lighted match could make oxygen and hydrogen in a glass bowl a drop of water. The thunder is that lighted match that makes oxygen and hydrogen water and rain. At low pressures, the water evaporated from the sea is split into oxygen and hydrogen. It is reversible.

So, a compressor could make such suction pressure on water and separate oxygen from hydrogen. Then, the mixed oxygen and hydrogen are compressed to lead to either oxygen or hydrogen liquifaction and the other one remains gas. Because liquifaction conditions (pressure and temperature) of oxygen differs from liquifaction conditions of hydrogen. Then the hydrogen could be withdrawn to make the cleanest carburant that powers engines, power plants etc.

So, compressors on valves and water could make the engine of tomorrow.

Background of the invention and date of conception:

In 1990, I was in Lebanon and I found the concept: if you have two sources of energy, you can create a third source that has a temperature higher than these two sources by using these two sources.

Its application is a Cycle (of heat exchangers, expansion valves, pump or compressor) by creating this cycle you can create this third source. If you have two sources of temperature, you can have a cycle that create power. Using this power you can have a cycle that gives you a third source higher or lower than the two sources.

By combining these two cycles or a short cut of these two cycles you can create this third source of temperature. In 1992, in Lebanon, I found by analogy, that if you have two sources of pressure, you can create a third source higher than these two sources by using these two sources. Its application led to the pump and compressor that works on valves and consequently the engines.

Purpose:

We can get pumps, compressors, engines, and power plants that operate without energy consumption.

Parts:

For pumps and compressors (cylinders connected by pipes, heavy pistons, electric valves).

For engine 1: blades in a cylinder connected to a shaft and compressors that work on valves.

For engine 2: a compressor on valves that make suction pressure and separate oxygen from hydrogen, then a compressor on valves to compress oxygen and hydrogen, then a compressor on valves to suck the liquid (either oxygen or hydrogen) and send it to a hydrogen engine

Use:

Pump and compressor: we feed the first cylinder with fluid and we operate the valves, we get the pressured fluid.

Engine 1: we operate the valves of the compressors without feeding, we get a closed circuit at each compressor and the blades turns and generate power.

Engine 2: we operate the three compressors on valves consequently with a time delay at first of operation. Then, we turn the hydrogen engine on.

Novel Features:

It is a new field by itself. I never heard or red or met anything like it. I am a mechanical engineer and I know that this is a new era in power.

Advantages:

Power generated without energy consumption, power without noise and without pollution.

Testing Results:

Pump and compressor: I connected a container of water to a cylinder through a valve and I have put a piston with 20 lbs on top of it in the cylinder and have taken a hose from the cylinder through a valve. I turned valve 1 on. Water rose in the cylinder. Then, valve 1 off, and valve 2 on. I got a jet of water of approximately 5 meters.

Engine 1: I took a centrifugal backward bladed fan and closed it up and connected it to four pumps on valves , every compressor to two pipes making 45 degrees with each other on the fan casing. I opened the four first valves , then I closed them and opened the second four valves . the shaft turned.

Of course, a good design should be done to make this engine and the blades should be extended to the shaft This was an experiment and not a well designed engine.

Engine 2: if the decompression and the compression on normal compressors will lead to the seperation of oxygen and hydrogen (one liquid, one gas). It means that it will surely work on compressors on valves, Because the latest worked perfectly. The decompression and the seperation of oxygen from hydrogen is the law of the clouds and the compression follows the rules of liquifaction.

See additional inventions/ideas for sale by Engineer inventor Hannah Awad:

Index Target market: General Dynamics, Boeing, General Motors, and Energy companies, e.g. General Electric.

Steps to follow to view application on USPTO Website:

Step 1: Highlight and copy the patent application number shown above.

Step 2: Visit: uspto.gov

Step 3: Click on the "Status/IFW" link under Patents (all on the top left hand side of the USPTO main page).

Step 4: Paste the patent number in the blank field provided. (The default Search Method is "Application Number").

Step 5: Click on the "Submit" button using your computer's mouse, or hit "Enter" using your computer's keyboard. To make a complaint about the inability for us to link directly to the USPTO Website and view public information available on filed patents, please contact the USPTO or your local Senator.

Buy this patentable idea for sale- hydrogen extraction with zero energy patentable idea. View the continuation patent- links available below. Continue the patent application process to own patent rights to this revolutionary invention.

Compressor - How to Extract Hydrogen with Zero Energy

Abstract:

For additional details on this patentable invention, click on the link below to view the continuation patent application. Reference: rising energy costs.

Buy patentable ideas for sale- buy this hydrogen extraction with zero energy patentable idea. A patent application has been filed and is patent pending. A continuation patent application has been filed for this revolutionary new energy saving invention. The invention (involving the two patent applications) of extracting hydrogen with zero energy is for sale: $1,000,000. The Inventor states that up to $100,000 im prototype cost will be deducted from the sale. A special price will be given to a serious buyer. According to sources, this intellectual property has extreme merit, and is worth $100,000,000 minimum, once the patent issues.

This invention consists of splitting oxygen and hydrogen from water by sucking water in the form of vapor (the pressure above water is so low that the water boils at atmospheric temperature).

Next, the vapor is further sucked (with a lower pressure than the first cylinder). Next, the vapor is compressed with a pressure higher than both cylinders because piston 2 has the largest displacement.

The constant of the spring and its displacement of spring 2 is higher than both spring 1 and spring 3. The constant of the spring and its displacement of spring 1 is between spring 2 and spring 3. The sum of the displacements of spring 1 and spring 3 must be less than the displacement of spring 2. The sum of the spring constants of spring 1 and 3 must be less than the spring constant of spring 2.

The three cylinders can be repeated (three cylinders linked to another three cylinders, etc.), until we have a pressure at the last cylinder that will liquefy hydrogen. (The liquefaction point of hydrogen is different from the liquefaction point of oxygen). We extract hydrogen by pressure and use it as a fuel.
This revolutionary invention has had 12 previous offers from investors and interested parties. $100,000 is now being offered to be deducted from the offer amount.